RS ROM 10.2.1.0 [Kenzo] Android 7.0

RS ROM 10.2.1.0 [Kenzo] Android 7.0

Welcome dear guests.
Today I am proudly presenting the update of RS ROM for our beloved Redmi Note 3 Pro aka KENZO. The ROM is based on Nougat (7.0). 

The ROM is super stable and can be used as a daily driver. For better and thorough details about the features of this ROM kindly read below. Do spend some time reading the RS ROM features. Its worth reading all that. In the end of the introduction I will say that follow the guide properly and GOOD LUCK.

Requirements: Bootloader must be unlocked ,OrangeFox TWRP recovery, RS ROM, lazyflasher, My Instructions, Patience.

It will be the Final android 7.0 version as per NOW

RS Rom Features

• More RAM implementation [1.8 GB Free]
• Based on MiRoom
• Deodexed  
• Advanced Power Menu 
• Inbuilt Google Play Store
• Added tweaks for better performance
• English Theme Store with support for applying third party themes
• VoLTE (Voice over LTE) is working perfectly after the first boot
• DPI changed to 400 for better viewing experience
• Optimized for Indian Users
• Split Screen Working Perfectly
• GPS working without any issues
• Face Unlock is working
• Swipe to expand notifications added
• Pre-Rooted with Magisk 18.1
• Added Wallpaper Carousel
• Read Mode Fixed
• Auto Brightness Fixed
• Brightness Slider working perfectly
• Fingerprint in Applock working perfectly
• First Fingerprint unlock is allowed
• Flash lazy flasher at the end
• You can easily get 4 hrs or more hrs of SOT with 4G on. 
• All the required files will be linked below

Screenshots

Bugs

• ViLTE (Video over LTE)
• Video recording and maybe image capturing are not working in default MiCamera [It is better to disable it]
• Fingerprint after a deep sleep or after 1 minute of call [To fix it, read point number 10 of important notes section]

Installation Process

1. Download the ROM version you like.
2. Download DPI Patch if you want
3. Download LazyFlasher
4. Move all to your internal memory
5. Reboot to TWRP
6. Wipe Data, System, Dalvik cache and Cache
7. Install the ROM > DPI Patch > LazyFlasher
8. Wipe caches and Reboot system
9. First boot may take 10 minutes so wait patiently or have a cup of tea
10. Complete first setup, add password and skip fingerprint addition.
11. Open Magisk and install the modules you want to
12. Reboot system
13. Goto Recovery and flash Migrate Backup if any
14. Install the given Camera apps using Package installer to record and capture photos
15. Make sure to read the important notes given below

Some important notes

1. Flash ROM -> DPI Patch if you want and then lazy flasher
2. Complete first boot setup
3. Do not set up fingerprint here, Skip it, Set up only the Pattern, Password or Pin lock here
4. After completing the first boot setup, reboot to twrp to install any Magisk modules or Migrate data backup.
5. After completing all the work with TWRP Flashing wipe caches
6. Reboot to system, Add Face Data and Fingerprints.
7. After that do not reboot.
8. Sometimes, you may find that fingerprint scanner is not opening the lockscreen, do not worry use your password/ pattern/ pin or face to unlock.
9. Fingerprint scanner will work 10/10 in applock if you follow this method.
10. If by chance it is not recognizing your fingerprint, add a new one {It will recognize your fingerprint after 1 or 2 seconds}
11. Use SNAP CAMERA APP for recording videos

Downloads
RS ROM with Escrima Kernel [Link] 
RS ROM with Agni Kernel 13.6 [Link] 
DPI Patch for setting 420 dpi [Link] 
DPI Patch for setting 480 dpi [Link] 
Lazy Flasher [Link]
Snap Camera [Link]
Google Camera [Link]
Fix [coming soon]

All Thanks to helpers, supporters and testers especially to Alex , Amog and Akshay because of whom this ROM is out.

Do Comment ,Subscribe And Share my blog. If you have any questions about anything do comment below i will try to answer that as soon as possible.